-
Source:Industrial Automation / Time:2026-08-20
SGMXJ Series Main Circuit Cables: Standard and Flexible Options with 50m Length Support
Yaskawa provides comprehensive main circuit cable options for SGMXJ series servomotors (50W to 600W), with both standard and flexible cables available in lengths up to 50 meters .
Details -
Source:Industrial Automation / Time:2026-08-20
Field Diagnostic Guide: Cable Fatigue as Primary Cause of Yaskawa Robot Intermittent Disconnects
Field diagnostics have identified cable fatigue and shielding degradation as the primary cause of intermittent disconnect issues in Yaskawa robots, particularly in teach pendant cables and encoder signal lines . Common Failure Points: Component Failure Mode Symptoms Teach Pendant Cable Conductor fatigue from repeated bending Screen freeze during motion Encoder Cable Shield degradation under continuous motion Random disconnection under vibration MECHATROLINK Cable Packet loss under EMI/ vibration Node timeout, communication errors Key Diagnostic Insight: If a Yaskawa system resumes normal operation after restart but the issue returns randomly, the root cause is highly likely physical communication instability rather than controller logic failure . Motion Load Cable Stress Test: Run robot in normal operation mode Monitor pendant stability during motion Apply controlled bending to the pendant cable Observe real-time communication response Interpretation: If faults appear during ca
Details -
Source:Industrial Automation / Time:2026-08-20
JZSP-CL2L100-05-E: 5-Meter Linear Motor Sensor Cable with Built-in Polarity Hall Sensor
The JZSP-CL2L100-05-E is a specialized 5-meter sensor cable/cordset designed for Yaskawa SGLFW2 series linear motors, featuring a built-in polarity Hall sensor for precise position feedback . Key Specifications: Feature Detail Length 5 meters Compatibility SGLFW2 series linear motors Sensor Type Built-in polarity Hall sensor Series Sigma-7 series cables Equivalent JZSPCL2L10005E Application Context: This cable is specifically engineered for linear motor applications where Hall sensor feedback is required for commutation and position control. The built-in polarity Hall sensor eliminates the need for separate sensor wiring, reducing installation complexity in linear motion systems. Availability: The cable is commercially available through specialized distributors with pricing approximately $283 per unit .
Details -
Source:Industrial Automation / Time:2026-08-20
JZSP-CF2M00-03-E: 3-Meter Main Circuit Cable for SGMMV Sigma-5 Mini Motors
The JZSP-CF2M00-03-E is a 3-meter main circuit cable/cordset designed for Yaskawa SGMMV Sigma-5 mini series servo motors with holding brakes . This cable provides a complete connection between the servo drive and motor, featuring lead wires on the amplifier side and a 6-pin connector on the motor side . Key Specifications: Feature Detail Length 3 meters Compatibility SGMMV Sigma-5 mini series with holding brake Drive End Lead wires (amplifier side) Motor End 6-pin connector Application Servo motor main circuit connection Availability: The cable is available through distributors, including inventory in Las Vegas, Nevada, with pricing typically around $88 for new units . This product supports maintenance and replacement needs for Sigma-5 mini series systems in compact automation applications.
Details -
Source:Industrial Automation / Time:2026-08-20
Sigma-X Series Encoder Cables: Batteryless vs. Absolute Options with Flexible Variants
Yaskawa provides a comprehensive selection of encoder cables for Sigma-X series systems, with specific options for batteryless absolute encoders and absolute encoders with integrated battery units . The cables are available in both standard and flexible variants, with flexible cables recommended for moving parts of machines such as robots. Key Specifications: Cable Type Length Options Standard Cable Flexible Cable Batteryless Absolute (Left) 0.3m - 50m JWSP-XP2IS1-□□□ JWSP-XP2IF1-□□□ Batteryless Absolute (Right) 0.3m - 50m JWSP-XP2IS2-□□□ JWSP-XP2IF2-□□□ Absolute Encoder (with Battery) 3m - 25m JWSP-XP2AS1-□□□ JWSP-XP2AF1-□□□ Critical Safety Note: Install a battery at either the host controller or on the encoder cable—never both simultaneously. Installing batteries in both locations creates a loop circuit between the batteries, which may result in a fire from product failure that could cause death or serious injury . Flexible Cable Specifications: Recommended bending radius (R): 46
Details -
Source:Industrial Automation / Time:2026-08-20
Yaskawa Cable Availability in India
Yaskawa servo cables are available through distributors in major Indian cities including Chennai, Bangalore, Pune, Mumbai, Ahmedabad, Hyderabad, and Delhi . Available Product Types: Servo encoder cables (JZSP-CVP01-10-E, JZSP-CVP01-15-E) Signal wire cables (JZSP-CSP01-03-E, JZSP-CSP01-05-E) I/O cables (CN1 JZSP-CSI01-1-E, JZSP-CSI01-2-E) Internal encoder cables (UTOPH-81AWF) Power cables for various motor series This distribution network ensures availability of genuine Yaskawa cables for maintenance and new installations.
Details -
Source:Industrial Automation / Time:2026-08-20
High-Flex Power Cable for 3.0-4.4 kW Motors
The premium flexible power cable B3EP-10(A)-E is specifically designed for 400V motors in the 3.0-4.4 kW range . Key Features: Double-jacket shielded construction Flex-rated for continuous motion Right-angle connector for space-constrained installations Compatible with SGMGV and SGMSV motor series This premium cable is suitable for demanding applications requiring high durability and flexibility
Details -
Source:Industrial Automation / Time:2026-08-20
UTOPH-81AWF Internal Encoder Cable
The UTOPH-81AWF is an internal encoder cable for Yaskawa UT series encoders for AC Servo and Spindle motors . Key Specifications: Feature Detail Model Number UTOPH-81AWF Category Internal encoders Type Incremental encoder (optical encoder) Resolution 8192 pulses/rev Conductor Material Aluminum This cable is used with optical incremental encoders for precise position feedback .
Details -
Source:Industrial Automation / Time:2026-08-20
Premium Type Brake Power Cables for SGMSV Motors
Yaskawa provides premium type brake power cables for SGMSV 200V brake motors, available with outline drawings for integration support . Cable Models: BABEP-xx(A)-E BCBEP-xx(A)-E BDBEP-xx(A)-E These cables are available in lengths of 3m, 5m, 10m, 15m, and 20m
Details -
Source:Industrial Automation / Time:2026-08-20
JZSP-CSI01-1-E / -2-E 50-Core I/O Cables
The JZSP-CSI01-1-E and JZSP-CSI01-2-E are 50-core I/O cables for Yaskawa servo systems, available in lengths of 0.5m, 1m, 2m, and 3m . Key Specifications: Feature Detail Connector CN1 Part Number JZSP-CSI01-1-E / JZSP-CSI01-2-E Type 50-Core IO Cable Length Options 0.5m, 1m, 2m, 3m These cables support I/O connectivity between servo drives and controllers, enabling flexible system configuration .
Details
Industrial Automation
