Inovance IS300 Series: Main and Control Circuit Wiring
The IS300 Series servo drive, designed for permanent magnet synchronous motors, provides detailed wiring instructions for main circuit terminals and control circuits .
Main Circuit Terminals:
Terminal | Name | Description |
|---|---|---|
P, (+) | Reactor connection | External reactor for IS300T140-C and above |
U, V, W | Drive output | Connect to three-phase motor |
Ground | Grounding | Must be properly grounded |
Control Circuit Jumper Functions:
Jumper | Position 1 | Position 2 |
|---|---|---|
J2 | GND connected to ground capacitor | GND not connected |
J3 | COM connected to ground capacitor | COM not connected |
J4 | AO1 voltage output (0-10V) | AO1 current output (0-20mA) |
J5 | AI3 voltage input (-10 to 10V) | AI3 current input (0-20mA) |
J7 | Internal power for DI | External power for DI |
The IS300 supports applications including plastic molding, pipe extrusion, shoe making, rubber production, and metal casting .
