-
Source:Industrial Automation / Time:2026-08-19
Brake Power Cable with Vertical Lead for HK-KT Series
Mitsubishi offers the MR-AEP1CBL10M-A5-L, a 10-meter power cable with vertical lead design specifically for HK-KT series servo motors . Key Features: Connection Type: Servo motor connector + servo amplifier connector Length: 10 meters Design: Vertical lead for space-efficient routing This cable is designed for applications requiring vertical cable exit from the motor connection, reducing strain and improving cable management in tight spaces.
Details -
Source:Industrial Automation / Time:2026-08-19
MISUMI Custom Power Cables with 0.1m Increment Length Selection
MISUMI provides extensive power cable customization for Mitsubishi J4/J3/JN series with length specification in 0.1-meter increments . Customizable Features: Length: 0.2m to 30m (0.1m increments) Cable Type: Standard, shielded, brake variants Leading Direction: Load-side or anti-load-side Termination: Direct connection or one-end cut Model Naming Examples: Model Features SVPMH-J3HF1B-A-[0.2-30/0.1] Brake cable, load-side leading SVPMH-J3HF1BR-A-[0.2-30/0.1] Brake cable, anti-load-side leading SVPMH-J3HF1-HM-D-[0.2-30/0.1] Power cable, motor-side one-end cut This customization capability allows precise cable lengths for optimized panel layouts and reduced service loops.
Details -
Source:Industrial Automation / Time:2026-08-19
Mitsubishi Power Cable Extension Guidelines for Long-Distance Wiring
For wiring lengths exceeding 10 meters, Mitsubishi provides specific extension cable recommendations to maintain performance . Extension Guidelines: Motor Series Base Cable Extension Wire Compliance HG-KN13~73 (0.75mm²) MR-PWS2CBL03M-A_-L HIV wire 1.25mm² (AWG 16) Standard HG-KN13~73 (0.75mm²) MR-PWS2CBL03M-A_-L HIV wire 2mm² (AWG 14) UL/CSA HG-SN52/102 (1.25mm²) - 2mm² (AWG 14) UL/CSA Brake Wire Extension: For brake wire length > 10m, extend with HIV wire of 1.25mm² (AWG 16) These extension guidelines ensure proper voltage delivery and thermal performance over extended cable runs.
Details -
Source:Industrial Automation / Time:2026-08-19
HG-KN Series Encoder Cable Models: Standard vs Long Bending Life
Mitsubishi offers encoder cables for HG-KN series motors in both standard and long bending life variants, with lengths from 2m to 10m . Encoder Cable Comparison: Model Length Bending Life IP Rating MR-J3ENCBL2M-A1-H 2m Long bending life IP65 MR-J3ENCBL5M-A1-H 5m Long bending life IP65 MR-J3ENCBL10M-A1-H 10m Long bending life IP65 MR-J3ENCBL2M-A1-L 2m Standard IP65 MR-J3ENCBL5M-A1-L 5m Standard IP65 MR-J3ENCBL10M-A1-L 10m Standard IP65 Key Differentiators: -H suffix: Long bending life for dynamic applications -L suffix: Standard bending life for static installations A1 series: Load-side lead (direct connection type) A2 series: Opposite to load-side lead IP65 rating provides dust-tight and water-resistant protection for all variants.
Details -
Source:Industrial Automation / Time:2026-08-19
Wire Gauge Specifications for Mitsubishi Servo Motors
Mitsubishi provides specific wire size recommendations for power, grounding, and electromagnetic brake connections based on motor model . Wire Gauge Recommendations: Motor Model Power/Ground Wire Size Brake Wire Size HG-KN13~73, HG-SN52/102 0.75 mm² (AWG 18) 0.5 mm² (AWG 20) HG-SN152/202 2 mm² (AWG 14) 1.25 mm² (AWG 16) HG-SN302 3.5 mm² (AWG 12) 1.25 mm² (AWG 16) Important Notes: Use fluorine resin wire for servo motor power connector wiring For wiring length > 10m, use MR-PWS2CBL03M-A_-L with extension For UL/CSA compliance, use 2mm² (AWG 14) for HG-KN series power wiring For UL/CSA compliance on HG-SN52/102, use 2mm² (AWG 14) These specifications ensure proper thermal performance and voltage drop management for reliable servo operation.
Details -
Source:Industrial Automation / Time:2026-08-19
MISUMI Power Cables for Brake-Equipped Motors
MISUMI provides specialized power cables for Mitsubishi servo motors with electromagnetic brakes, supporting both load-side and anti-load-side cable leading . Brake Cable Models: Model Series Compatible Motors Type SVPM-J3HF1B HF-KP□B/MP□B/KN□B Load-side leading, brake SVPM-J3HF1BR HF-KP□B/MP□B/KN□B Anti-load-side leading, brake SVPM-J3HF2B HG-SR□, HF-SP51B~702B Medium-large brake SVPM-J3HF7B HA-LP502, HC-LP302, HC-RP353/503 Large-capacity brake Configuration Options: Cable length specifiable by 0.1m increments Shield processing (earth wire) available on amplifier side Fits within clamp for most models (J3HF8 and J3HF7B exception) These cables integrate power and brake control in a single assembly, simplifying wiring for vertical-axis applications.
Details -
Source:Industrial Automation / Time:2026-08-19
MISUMI Encoder Harness with 90° Angle Connectors for Space Saving
MISUMI offers encoder harnesses with 90° angle connectors for Mitsubishi J3/J4/JN series, supporting space-constrained installations . 90° Angle Series: Model Series Type Length Range SVEMH-J3HF2AL Direct connection, dual-ended 0.2-10m SVEMH-J3HF2AL-HA Amplifier-side one-end cut 0.2-10m SVEMH-J3HF2AL-HM Motor-side one-end cut 0.2-10m SVEMH-J3HF2LAL Extended length dual-ended 10-50m Processing Options: With/without single connector at amplifier side With/without single connector at motor side Dual-ended direct connection The 90° angle design reduces required clearance behind connectors, enabling more compact panel layouts.
Details -
Source:Industrial Automation / Time:2026-08-19
MISUMI Power Cables for Medium and Large-Capacity Motors
MISUMI provides power cables for Mitsubishi J4/J3/JN series supporting medium and large-capacity motors, with custom lengths up to 30 meters . Cable Type Summary: Cable Type Compatible Motors Application SVPM-J3HF1 HG-KR□, HG-MR□, HF-KP□/MP□/KN□ Load-side leading SVPM-J3HF1R HG-KR□, HG-MR□, HF-KP□/MP□/KN□ Anti-load-side leading SVPM-J3HF2 HF-SP51/52 Medium capacity SVPM-J3HF3 HF-SP81/102/152, HG-R51/81/52/102/152 Medium-large SVPM-J3HF5 HF-SP121/201/202 Large capacity SVPM-J3HF6 HG-SR121/201/301/202/352/502 High power SVPM-J3HF8 HG-SR421/702, HF-SP421/702 Ultra-high power SVPM-J3HF9 HC-LP52/102/152, HC-RP103/153/203 Specialized Configuration Options: Load-side leading (motor shaft side) Anti-load-side leading (opposite side) Brake cable variants marked with "B" Shielded versions with earth wire on amplifier side This comprehensive range supports servo motors from small-capacity to ultra-high-power applications.
Details -
Source:Industrial Automation / Time:2026-08-19
Change in CN8 Short-Circuit Connector Shape
Mitsubishi Electric has changed the shape of the short-circuit connector for the CN8 connector of AC servo amplifiers (MR-J4, MR-J5 series) to facilitate insertion and removal . Change Details: Feature Detail Change Entire length shortened by 6.6 mm Reason To facilitate insertion and removal near CN8 connector Impact No effect on functions and performance Effective Sequential from August 2021 production Important Note: The new connector can be removed with the same force as the conventional connector because the shape of the mating area has not been changed. Both former and new shapes may be distributed simultaneously depending on stock status.
Details -
Source:Industrial Automation / Time:2026-08-19
MR-AEP1CBL10M-A5-L: 10-Meter Power Cable with Vertical Lead
Mitsubishi offers the MR-AEP1CBL10M-A5-L, a 10-meter power cable with vertical lead design for HK-KT series servo motors . Key Specifications: Feature Detail Length 10 meters Design Vertical lead Connection Type Servo motor connector + servo amplifier connector Compatibility HK-KT series The vertical lead design facilitates cable routing in applications with specific space constraints, reducing strain on connectors.
Details
Industrial Automation
