Monitor Output (X7) Cable Connections for System Diagnostics
Source:Industrial Automation /
Time:2026-08-17
The X7 connector on the front panel provides monitor output signals for system diagnostics and performance analysis .
X7 Connector Pin Assignment:
Pin | Signal | Function |
|---|---|---|
1 | AM1 | Analogue monitor output 1 |
2 | AM2 | Analogue monitor output 2 |
3 | GND | Signal ground |
4 | DM | Digital monitor output |
5 | - | Do not connect |
6 | - | Do not connect |
Output Specifications:
Analogue Output: ±10V amplitude, 1kΩ output impedance
Digital Output: CMOS level compatible, 2.2kΩ output impedance
Usage:
Both analogue and digital outputs can be switched by setting parameters. When connecting a measuring instrument, check its input circuit for impedance matching . The monitor output signals can be used for:
Speed monitoring
Torque monitoring
Position monitoring
